Ежедневное обслуживание встроенного промышленного компьютера и отличие от обычного промышленного компьютера

Jun 02, 2021

Оставить сообщение

1. Жесткий диск, оптический привод, дисковод


Жесткий диск: не разбирайте жесткий диск по желанию, избегайте вибрации и сжатия; избегать частых внезапных отключений во избежание повреждения дорожки жесткого диска и потери данных; не прикасайтесь к перемычке на жестком диске по своему желанию; при транспортировке обязательно используйте антистатические пластиковые пакеты или губки, чтобы избежать ударов. Материал под давлением закреплен, и вирусы часто проверяются, чтобы предотвратить проникновение; когда в операционной системе есть функция энергосбережения, ее следует использовать разумно, чтобы продлить срок службы жесткого диска.


   Optical drive: Do not open the door of the optical drive at will during use to prevent dust from entering the optical drive. Do not shake, distort, or beat the optical drive during use. The data cable should be connected smoothly to ensure that the optical drive reads the disk smoothly.


   Floppy drive: Do not put bad or poisonous disks into the floppy drive. Do not use inferior and moldy floppy disks to prevent scratching the head. When the floppy drive is performing read and write operations on the disk, do not forcibly remove the disk to prevent damage to the magnetic head or offset of the magnetic head, resulting in failure to read and write normally.


   2. Chassis


   Industrial control power supply: Minimize the entry of dust and prevent excessive humidity.


   Passive backplane: It is not possible to remove and insert the board when the backplane is electrified. Do not use excessive force when plugging and unplugging the board. When cleaning the backplane with alcohol etc., pay attention to prevent the tool from scratching the backplane. Do not accumulate dust in the slot, otherwise it is easy to contact poorly and short-circuit. The metal feet in the slot are aligned without bending, so as to avoid various phenomena such as no display at startup, no board card, and crash.


   Three, industrial computer motherboard


Не подключайте и не отключайте питание, чтобы не повредить разъем; перемычку на материнской плате нельзя перескакивать случайно, иначе она выйдет из строя из-за разной настройки напряжения разных типов материнских плат; пыль на материнской плате следует регулярно очищать, а спирт или воду использовать нельзя. Щетка или пылесос для всасывания или сдувания пыли; Держите слот памяти на материнской плате в чистоте.


   Embedded industrial computer has reliable performance, fanless structure, small size and low price, so it is becoming more and more widely used in industrial computer. Especially in recent years, with the development of embedded technology, embedded industrial computer is also developing rapidly, and it is quickly applied to various fields and occupying an increasingly important position.




В чем разница между встроенным и обычным промышленным компьютером?


   One, the advantages of embedded industrial computer in terms of product performance


  1. The miniaturization of the device is one of the main manifestations, which is reflected in a compact design. There is no standard for structural design to refer to. Full consideration should be given to the rational use of external interfaces and installation space.


  2. The product has good functional adaptability and almost completely matches the function of the tested and controlled object. It has a certain degree of scalability but does not take expansion as the main purpose, so the product is cost-effective.


  3. Reliability requirements are high. On the basis of electrical functions that meet the reliability design, careful consideration should be given to reliability design content such as heat dissipation design, electromagnetic compatibility design, dustproof and waterproof design, and anti-vibration design.


   4. Low power consumption fanless design is the mainstream. Due to the miniaturization of the device, the heat dissipation capacity is limited, and the MTBF requirement of the embedded system is also very high, especially in unattended applications, low-power fanless design becomes a must.


   2. The difference between embedded industrial computer and ordinary industrial computer


1. The position of the embedded industrial computer in the entire measurement and control system is often at the front end. The upward connection of the embedded industrial computer is often an ordinary industrial computer. The computing power, software resources, database support and other aspects of the ordinary industrial computer are all embedded It's hard to reach the industrial computer.


  2. In the construction of large-scale systems, the system expansion capabilities and network communication capabilities of ordinary industrial computers are also difficult to replace with embedded industrial computers.


  3. In the fields of visual design, process monitoring, data statistics, scientific calculation, prototype simulation design, online simulation, etc., ordinary industrial computers have inherent advantages.


Отправить запрос