The LCD splicing screen is no longer a luxury product decades ago. With the popularization of intelligence, the application field of LCD splicing screens has become more and more extensive. With the development of LCD splicing technology, the service life of LCD splicing screens has been continuously extended. , The service life of the backlight source of the ordinary LCD screen is 10,000 to 30,000 hours, and the service life of the backlight source of the LCD splicing screen can reach more than 50,000 to 100,000 hours. Of course, this is closely related to our daily maintenance. , Our daily maintenance not only has a major relationship with the service life of the LCD splicing screen, but also affects the display effect of the LCD splicing screen when it is used, so it is very necessary to carry out the daily maintenance of the LCD splicing screen. Today the splicing screen manufacturers will tell you the correct way to clean the dirt on the LCD splicing screen.
Clean up the oil on the screen. For alcohol that needs to be used, use a special LCD wipe with a little alcohol, and then gently wipe the oily area. After wiping it, wipe the screen with a dry towel immediately. Do not touch too much alcohol. Alcohol will have a corrosive effect on the screen. Be sure to wipe the screen with a towel immediately after cleaning.
Splicing screen manufacturers tell you the correct way to clean LCD splicing screen dirt
In the maintenance of LCD splicing screen, we have involved the cleaning of dust. A seemingly simple operation actually contains a lot of tricks when cleaning the dust on the surface of the screen. First of all, we can blow gently at the screen with our mouth, and gently blow off the dust on the screen. For the part of the dust that has not been blown off, use a special liquid crystal wiping cloth to gently wipe on the LCD splicing screen. When wiping, pay attention to small force, and do not use strong force to wipe on the screen. Clean up fingerprints on the screen. To clean the fingerprints on the screen, you need to use a special screen cleaner and a special LCD wiping cloth. First, we pour a little of the special LCD splicing screen cleaner onto the special LCD wiping cloth, and then use the special LCD wiping cloth on Wipe the fingerprinted area gently, and then wipe the screen gently with a dry soft towel.
What I want to remind here is that when you find that the LCD splicing wall is dirty, you must use the correct method to cut the root of the dirt. The best medium to use is soft, non-fiber material, such as absorbent cotton, lens tissue or soft cloth, etc., and then dip a small amount of glass cleaner to wipe it off quietly, avoid using chemical solutions such as alcohol, or use rough The cloth or paper items are prone to scratches due to this kind of material. What I want to remind everyone here is that don't spray the cleanse directly onto the display screen, it can easily flow into the screen and cause short circuits on the outside of the LCD screen, causing unnecessary losses.

