1. When the ABS anti-lock failure lamp lights up, it may be that there is gas in the pipeline, which will obviously affect the adjustment of the pressure of the steering system, resulting in the loss of the ABS system;
2. The function of ABS is to control the adjustment of the braking force by adjusting the pressure of the hydraulic transmission system. If there is gas, it will affect the pressure transmission;
3. Therefore, after the maintenance of the ABS system software, please remember to loosen and discharge the gas in the pipe to cancel it.
The function of ABS is to automatically control the force of the steering system of the steering system when braking, so that the tires are not locked by the wheels and are in the specific situation of rolling and slipping (movement rate of up to 20 percent ) to ensure that the wheels are in contact with each other. The adhesion of the road surface is at its maximum;
The anti-lock steering system can improve the reliability of the car in a tight stop when driving;
In a car without ABS, when a motor vehicle uses emergency brake pads in an emergency, it is easy to cause tires and wheels to lock up, that is, the steering wheel cannot be turned, so the risk factor will be accompanied by an increase, which can easily lead to serious threats.
The ABS anti-lock brake system is a type of electronic automatic control system for motor vehicles. It includes an electronic component adjustment module, several abs sensors and a gate valve with a vacuum valve.
The electronic component adjustment module grasps the specific conditions of the operation of the wheel according to the pulse change transmitted by the abs sensor.
When a certain wheel may cause the wheel to lock in a specific situation, the electronic component adjustment module will send a command to the vacuum valve, so that it can operate the brake plate and adjust the speed ratio according to the fast switch.

